Share/Bookmark Print

Craftsman Fir Fiberglass Doors

One-wide Cfraftsman Fir fiberglass door with mission-style dentil shelf and clear beveled glass with Patina caming in a 3w2h pattern.

Craftsman Fir Fiberglass Doors

  • Grain texture with the linear aesthetic of Fir
  • Square profile design with a Craftsman look
  • Mission-style dentil shelf option
  • Beveled glass with caming
  • "Spring" decorative glass option on #3CSPRP
  • Factory finish in 5 stain colors
  • Wide variety of handle set, lock & sill options
  • Inswing or outswing operation
  • Wood frames with or without extruded aluminum clad exterior

Panel Details

Construction

  • Fiberglass reinforced door skins
  • Full-length, high-strength, engineered composite stiles and top & bottom rails prevent moisture seepage
  • High-impact compression molded skins won't splinter, warp or rot
  • Environmentally-friendly polyurethane core provides high insulation properties

Texture

Each Craftsman fiberglass panel is available with a wood grain texture with the linear aesthetic of Fir.

  • Craftsman Fir

Glass

Direct Glazed

Glass is direct-glazed into the panels of Craftsman Fir doors and sidelites (i.e. the glass is not held in place with a saddle). This provides a clean, crisp aesthetic.

Beveled Glass

Craftsman Fir fiberglass doors have glass comprised of:

  1. Clear Beveled Glass
  2. Patina Caming

Patina Caming

#3CSPRP door & sidelite glass:

  • Decorative Glass ("Spring")
  • Patina Caming

Panels

Panel Designs

  • 3CB03P*
    Width:
    3-0
    Height:
    6-8
  • 3CB01P
    Widths:
    1-0, 1-2
    Height:
    6-8
  • 3CB06P*
    Width:
    3-0
    Height:
    6-8
  • 3CB02P
    Widths:
    1-0, 1-2
    Height:
    6-8
  • 3CSPRP*
    Width:
    3-0
    Heights:
    6-8, 8-0
  • 3CSPRP
    Widths:
    1-0, 1-2
    Heights:
    6-8, 8-0
  • *Mission-style dentil shelf available

*Matching mission-style dentil shelf available for door panels.

Hardware

NOTE:

On-screen images of finishes and colors may vary slightly from actual colors. Selections should be made based on actual color samples from your local dealer. Prices may vary depending on the color or finish chosen.

Operating Hardware

Standard

  • No handles or boring

Options

  • Single bore
  • Double bore
  • Custom boring
  • Single-point locking hardware (handle sets shown below)
  • Multi-point locking hardware with weather-resistant, stainless steel operator parts and hardware channels (handle sets shown below)
  • Keyed handle sets
  • Two-point flush bolts on the less active panel of French doors

Toronto Handle Sets

Toronto handle sets are available for most inswing and outswing doors. 

  • Bright Brass PVD
  • Antique Brass
  • Antique Nickel PVD
  • Matte Black
  • Oil-Rubbed
  • Satin Nickel PVD
  • Smoky Gray PVD
  • Rustic Umber

NOTES:

  • Oil-rubbed is a living finish which will change appearance over time.
  • PVD (Physical Vapor Deposition) finish is an application over the color which helps protect the  finish from tarnishing, peeling and cracking.

München Handle Sets

München handle sets are available for most inswing and outswing doors. 

  • Bright Brass PVD
  • Antique Brass
  • Antique Nickel PVD
  • Matte Black
  • Oil-Rubbed
  • Satin Nickel PVD
  • Smoky Gray PVD
  • Rustic Umber

NOTES:

  • München handles are not available on doors with 3" wide stiles.
  • Oil-rubbed is a living finish which will change appearance over time.
  • PVD (Physical Vapor Deposition) finish is an application over the color which helps protect the finish from tarnishing, peeling and cracking.

Dallas Handle Sets

Dallas handle sets are available for most inswing and outswing doors. 

  • Bright Brass PVD
  • Satin Nickel PVD
  • Matte Black
  • Smoky Gray PVD

NOTE: PVD finish is an application over the color that helps protect the finish from tarnishing, peeling and cracking.

Residential, Non-Adjustable Hinges

4" x 4" non-adjustable ball-bearing hinges with 1/4" radius corners are standard for wood and wood/clad outswing doors, standard for fiberglass doors, and optional for wood and wood/clad inswing doors

  • Bright Brass
  • Antique Brass
  • Satin Nickel
  • Oil-Rubbed*
  • Matte Black
  • Antique Nickel
  • Stainless Steel

*Oil-rubbed is a "living finish" which will change appearance over time

Residential, Adjustable Hinges

4" x 3-5/8" adjustable hinges with 5/8" radius corners are standard for wood and wood/clad inswing doors, optional for wood and wood/clad outswing doors, and optional for most fiberglass doors.

  • Bright Brass*
  • Antique Brass
  • Satin Nickel
  • Oil-Rubbed**
  • Matte Black
  • Antique Nickel
     
  • Gold-Painted
     
  • Brushed
    Chrome PVD†
  • Smoky Gray
    PVD†
  • Rustic Umber
     

*Also available with PVD finish – which is an application over the color that helps protect the hardware against tarnishing, peeling and cracking

**Oil-rubbed is a "living finish" which will change appearance over time

†Brushed Chrome and Smoky Gray are not available without PVD

Commercial, Non-Adjustable Hinges

Commercial-grade, non-adjustable, 4 x 4 ball-bearing hinges with square corners are standard for commercial doors and optional for all other swinging doors. 4-1/2 x 4-1/2 hinges are available as indicated.

  • Bright Brass
    4 x 4
    4-1/2 x 4-1/2
  • Antique Brass
    4 x 4
     
  • Satin Nickel
    4 x 4
     
  • Oil-Rubbed*
    4 x 4
    4-1/2 x 4-1/2
  • Matte Black
    4 x 4
     
  • Stainless Steel
    4 x 4
    4-1/2 x 4-1/2

*Oil-rubbed is a "living finish" which will change appearance over time

Sills

Weep Sills for Inswing Doors

  • Bronze anodized finish (shown on top)
  • Clear anodized finish (shown on bottom)

Adjustable Sills for Inswing Doors

  1. Bronze anodized finish (shown with nosing extension applied)
  2. Clear anodized finish

Bumper Sills for Outswing Doors

  • Bronze anodized finish (shown)
  • Clear anodized finish

ADA-Compliant Sills with Thermal Break for Inswing & Outswing Doors

  • For projects that require ADA-compliant sills in cold climates
  • Bronze anodized finish (shown)
  • Clear anodized finish

ADA-Compliant Sills (no thermal break) for Outswing Doors

  • For projects that require ADA-compliant sills
  • Bronze anodized finish (shown)
  • Clear anodized finish

Wood Sills for Inswing Doors

  • Oak wood species (shown)
  • Mahogany wood species
  • Not recommended for use in high moisture conditions

Wood Sills for Outswing Doors

  • Oak wood species (shown)
  • Mahogany wood species
  • Not recommended for use in high moisture conditions

Universal Design

1 - Bronze Anodized ADA-Compliant Sills  

  • With or without thermal break
  • Creates a flush surface for easy access to pass through

2 - Lever Handles

  • Available in a variety of styles and finishes
  • Make operating doors easier than door knobs


Panels

Unfinished

The exterior of door and sidelite panels are unfinished as standard. 

Factory-Finished Stain Colors

Five stain colors are available for the interior of textured panels.

  • Cherry
  • Lt. Oak 998
  • Red Wheat
  • Spiced Walnut
  • Sunset Oak

Please select colors based on actual samples from your dealer.

Clad Frame Options

Frame Construction

  • Durable .050" thick cladding of 6063 extruded aluminum alloy, press-fit onto the exterior wood frame
  • Accessory grooves are integral to the frame for easy addition of extruded trims and sill nosings

Fluoropolymer Exterior Finish

  • 70% PVDF fluoropolymer exterior finish
  • Meets performance requirements of AAMA 2605-13 – the most stringent testing procedures for organic coatings on aluminum extrusions
  • Resists chemicals, abrasion, corrosion, chalking and erosion
  • Maintains film integrity, retains the color and gloss
  • 30-year warranty extended directly to the homeowner (view Warranties)
  • Custom colors available

  •  
    Ultra Pure White
  •  
    White
  •  
    Abalone
  •  
    Alabaster
  •  
    Rustic
  •  
    Sand
  •  
    Mudpie
  •  
    Beige
  •  
    Spiced Vinegar
  •  
    Camel
  •  
    Natural Cotton
  •  
    Gingersnap
  •  
    Truffle
  •  
    Coal Black
  •  
    Slate
  •  
    Frosted Jade
  •  
    Kiwi
  •  
    Bayleaf
  •  
    Pumpkin Spice
  •  
    Butterscotch
  •  
    Hartford Green
  •  
    Mystic Ivy
  •  
    Green Tea Leaf
  •  
    Basil
  •  
    Manchester
  •  
    Chutney
  •  
    Antique Red
  •  
    Merlot
  •  
    Patriotic Blue
  •  
    Cape Cod
  •  
    Waterford
  •  
    Timberwolf

NOTES: Actual finish colors may vary from on-screen images. Please make selections using color samples from your local dealer. For custom colors, please provide a sample to your dealer.

Anodized Exterior Finish

Anodized finishes are created using an electrolyte process with oxide film to coat the aluminum cladding. This results in a reflective, metallic sheen.

  • Clear
  • Champagne
  • Light Bronze
  • Medium Bronze
  • Dark Bronze
  • Black
  • Auburn

NOTES: An acceptable light to dark color range is up to 5 Delta E’s, per AAMA 611-98 specifications, Section 8.3. This is due to variables which include (but are not limited to) part shapes, alloy variations and time in the anodizing process. This means that a sash part could appear slightly different in color than a frame part. This is considered acceptable. Samples of the color range are available upon request; even samples provided may vary from the final product due to these variables.

These are specialty colors which will incur an added charge and possible longer lead times. Actual finish colors may vary from on-screen images. Please make selections using color samples from your local dealer. For custom colors, please provide a sample to your dealer.

Mica Exterior Finish

Mica finishes are available on extruded aluminum clad products. They are fluoropolymer, but with mica flakes within the coating. This catches the light and results in vibrant, dimensional colors. 

  • 70% PVDF fluoropolymer exterior finish with mica flakes
  • Meets performance requirements of AAMA 2605-13 – the most stringent testing procedures for organic coatings on aluminum extrusions
  • Resists chemicals, abrasion, corrosion, chalking and erosion
  • Maintains film integrity, retains the color and gloss
  • 30-year warranty extended directly to the homeowner (view Warranties)

  • Cashmere Pearl
  • Driftwood
  • Espresso
  • Hazelnut
  • Autumn Spice
  • Golden Harvest
  • Pesto
  • Pearlescent White
  • Galaxy Silver
  • Silverstorm
  • Cosmic Gray
  • Night Sky
  • Café Noir

NOTES: These are specialty colors which will incur an added charge and possible longer lead times. Actual finish colors may vary from on-screen images. Please make selections using color samples from your local dealer. For custom colors, please provide a sample to your dealer.

Extruded Aluminum Brickmould Options

Extruded aluminum trim is designed to offer architectural aesthetics similar to wood trim, with the added benefit of greater durability and lower maintenance. Plus, extruded aluminum billet consists of 50-75% recycled material.

In most cases, the same color is chosen for the trim as for the window or door frame and sash. Combinations are possible, however. See the Tivoli Student Union project for an example of complementary colors used on sash vs. frame and trim, as well as custom trim profiles created for the project. Please contact your local Kolbe dealer to explore the possibilities of creating a custom trim profile.

  1. Ogee casing
  2. Stucco trim casing
  3. Pavilion brickmould
  4. Bull nose casing
  5. 1-5/8" brickmould
  6. 1-15/16" brickmould
  7. 2" flat casing
  8. 2" flat casing with backband
  9. Historic brickmould
  10. 3-1/2" profiled brickmould
  11. 3-1/2" flat casing
  12. 3-1/2" flat casing with backband
  13. Beaded casing
  14. Beaded casing with backband

NOTES: Limitations apply when combining trim options; i.e., not all brickmould profiles can be combined with all sill nosing profiles, and not all profiles are available for radius units.

Wood Frame Options

Frame Construction

  • Wood frame, exterior finished with latex primer, as standard; other finishes are available as shown below.
  • 1-15/16" brickmould exterior trim is applied as standard; other brickmoulds are available as shown below

Wood Species

  • Pine, standard
  • Other species may be available upon request

  • Pine (standard)
  • Alder
  • Fir
  • Maple
  • Cherry
  • Oak
  • Walnut
  • Mahogany
  • Bamboo*

NOTE: Because wood varies by nature, the actual wood used in our products may vary in grain and color from that shown here.

NOTE: Because wood varies by nature, the actual wood used in our products may vary in grain and color from that shown here. Selections should be made based on actual samples.

Wood Option - FSC Certified

Kolbe's wood products are constructed of pine as standard, for a stable product that will accept many beautiful finishes. Other wood species are available, as shown above.

Kolbe offers FSC COC certified wood for many of its products. This means it is harvested from well-managed forests and each entity that handles the wood complies with the social, economic and ecological values defined by the FSC. Learn more about FSC Certification and Kolbe's other Green & Sustainability initiatives.

K-Kron II Exterior Finish

K-Kron II colors are available for most Heritage Series wood products and the panels of Fiberglass doors. It is a three-step process: 1) Wood pieces are immersed in a preservative for protection from water, insects and fungus, 2) A high performance urethane primer is applied to help seal the wood and provide a tough bonding surface, 3) the topcoat finish is applied using an airless, control-spray system that ensures complete, consistent coverage. (Learn more). Kolbe offers an extensive array of colors, as well as custom colors.

  • Highest quality warranted finish for exterior wood substrates in the industry
  • Resists ultraviolet deterioration and chalking, chemical attack, as well as damage from salt, wind, sleet and snow
  • 10-year film integrity warranty extended directly to the homeowner (view Warranties)

  •  
    Ultra Pure White
  •  
    White
  •  
    Abalone
  •  
    Alabaster
  •  
    Rustic
  •  
    Sand
  •  
    Mudpie
  •  
    Beige
  •  
    Spiced Vinegar
  •  
    Camel
  •  
    Natural Cotton
  •  
    Gingersnap
  •  
    Truffle
  •  
    Slate
  •  
    Frosted Jade
  •  
    Kiwi
  •  
    Bayleaf
  •  
    Pumpkin Spice
  •  
    Butterscotch
  •  
    Hartford Green
  •  
    Mystic Ivy
  •  
    Green Tea Leaf
  •  
    Basil
  •  
    Manchester
  •  
    Chutney
  •  
    Antique Red
  •  
    Merlot
  •  
    Patriotic Blue
  •  
    Cape Cod
  •  
    Waterford
  •  
    Timberwolf

NOTE: Please make color selections using actual samples from your local dealer. For custom colors, please provide a sample to your dealer.

Exterior Wood Trim

Accentuate the beauty of your doors & folding windows with exterior brickmould casing:

  1. 1-15/16" profiled brickmould (standard)
  2. 3-1/2" profiled brickmould
  3. 3-1/2" flat casing
  4. 3-1/2" profiled brickmould with backband
  5. 3-1/2" flat casing with backband

NOTES: The window corner sections above show brickmould and sill nosing, however sill nosing does not apply to doors or folding windows.

Custom trim is available, contact your local Kolbe dealer for more information.

Wood Exterior Decorative Accessories

For extraordinary accent, consider the following accessories:

  1. Pediment head
  2. Keystones
  3. Rosettes
  4. Corner Blocks
  5. Dentil moulding
  6. Other custom wood moulding or trim


Panels

Unfinished

The interior of door and sidelite panels are unfinished as standard. 

Factory-Finished Stain Colors

Five stain colors are available for the exterior of textured panels.

  • Cherry
  • Lt. Oak 998
  • Red Wheat
  • Spiced Walnut
  • Sunset Oak

Please select colors based on actual samples from your dealer.

Interior Trim

Interior Trim Options

Accent the interior of windows and doors with interior casing.

  • 2-1/8" wide ranch casing (1) or 2-1/4" wide colonial casing (2) in pine or oak
  • Radius casing
  • Specialty mouldings are available in pine, oak and other wood species
  • Shipped loose for field application

 

Corner Block Options

Giving windows and doors a signature look has never been easier. Complement the interior with:

  • Corner blocks
  • Rosettes
  • Available in pine or oak


Drawing Files - Sizes / Elevations for Craftsman Fir Fiberglass Doors

Download: All files below

  PDF
Formulas & Charts
   Sizes, Dimension Calculations & Hinging
Rough Opening Statement
   This information is essential for accurate planning.

Drawing Files - Section Details for Craftsman Fir Fiberglass Doors

Download: All files below

  DWG DXF PDF
Ultra Series Frame
   1-Wide Active Inswing Door - Horiz
   1-Wide Stationary Inswing Door - Horiz
   2-Wide Active/Stationary Inswing Door - Horiz
   2-Wide Stationary/Active Inswing Door - Horiz
   2-Wide French Inswing Door - Horiz
   Active Inswing Door with Weep Sill - Vert
   1-Wide Active Outswing Door - Horiz
   1-Wide Stationary Outswing Door - Horiz
   2-Wide Active/Stationary Outswing Door - Horiz
   2-Wide Stationary/Active Outswing Door - Horiz
   2-Wide French Outswing Door - Horiz
   Active Outswing Door with Bumper Sill - Vert
Heritage Series Frame
   1-Wide Active Inswing Door - Horiz
   1-Wide Stationary Inswing Door - Horiz
   2-Wide Active/Stationary Inswing Door - Horiz
   2-Wide Stationary/Active Inswing Door - Horiz
   2-Wide French Inswing Door - Horiz
   Active Inswing Door with Weep Sill - Vert
   1-Wide Active Outswing Door - Horiz
   1-Wide Stationary Outswing Door - Horiz
   2-Wide Active/Stationary Outswing Door - Horiz
   2-Wide Stationary/Active Outswing Door - Horiz
   2-Wide French Outswing Door - Horiz
   Active Outswing Door with Bumper Sill - Vert

Drawing Files - All Files for Craftsman Fir Fiberglass Doors

Download files for this product: (does not include related product models)

Download: DWG files

Download: DXF files

Download: PDF files

All of the above


Use links at left to view detailed descriptions of individual files. Each page
includes a downloadable zip file of drawings in that category.


Finish Performance

K-Kron II Finish Performance

  • High performance finish
  • Resists ultraviolet deterioration and chalking, chemical attack, as well as damage from salt, wind, sleet and snow
  • 10-year film integrity warranty extended directly to the homeowner (view Warranties)
  • Warranty is transferable to subsequent homeowners
  • Over 30 vibrant colors to choose from (see Exterior tab)
  • Custom colors are available; simply provide a sample to your dealer

 

Three-steps to applying the K-Kron II exterior finish system
  1. Before assembly, wood pieces of the window or door are immersed in a preservative with both an insecticide and a fungicide -- helping the exterior wood surfaces resist decay. This preservative meets standards set by WDMA I.S.4-2000.
  2. The windows or doors are assembled. Before installing the glass, two coats of a specially-formulated urethane primer by Akzo Nobel is applied -- helping to seal the wood and provide a bonding surface for the final topcoat. The primer is applied using a controlled-spray process which follows WDMA T.M. 11-2000 guidelines.
  3. Finally, a high performance urethane topcoat is applied. An airless, multi-step, controlled-spray system ensures complete, consistent coverage of the exterior wood surfaces. The result? Beautifully protected windows and doors.

The K-Kron II three-step exterior finishing system follows WDMA T.M. 12-2000 guidelines.

Film Characteristics & Properties of K-Kron II

Applies to units of Ponderosa pine, sugar pine, Douglas fir, helmock and other select wood species.

Film Characteristics:           

Two coats high performance urethane exterior primer followed with one coat K-Kron II exterior colored topcoat1

Colors Available:

31 standard colors; custom colors available

Gloss:
@ 60°2 ASTM D 523-89 (1999)

35 +/- 5

Dry Film Thickness:

Average total dry film thickness equals 6.0-7.0 mils (4.0-4.5 mils primer and 2.0-2.5 mils topcoat)

Color Uniformity:
ASTM E 1164-02

Color instrumentally and visually controlled

Dry Film Adhesion (Crosshatch):
ASTM Method D 3359-02 (Method B, 6 cuts) (WDMA T.M. 12-2000, 5.2.1)

2B or better after tape is pulled off

Wet Film Adhesion:
(24 hours @100°F followed by 24 hour dry) (WDMA T.M. 12-2000, 5.2.2)

2B or better after tape is pulled off

Boiling Water Resistance:
(WDMA T.M. 12-2000, 5.2.3)

2B or better after tape is pulled off

Muriatic Acid Resistance:
(WDMA T.M. 12-2000, 5.6)

15 minutes - no effect

Chemical Resistance:
ASTM D 1308-02
(WDMA T.M. 12-2000, 5.3)

Pass - no damaging effect

Freeze/Thaw Cycling:
ASTM D 1211-97
(WDMA T.M. 12-2000, 5.4)

Pass - no damaging effect (33 cycles complete)

Impact Resistance:
ASTM D 2794-93 (2004)

Pass - no paint removal

Mortar Resistance:
(WDMA T.M. 12-2000, 5.7)

Pass - no loss of film, no visual change after water and/or 10% muriatic acid solution clean-up

Blocking Test:
(WDMA T.M 12-2000, 5.8)

Pass - no part-to-part blocking

Weathering Resistance -
Color Retention:
ASTM G155-04a

Max. 5 Delta E Units color change

Outdoor Exposure
WDMA T.M. 3:

Exposed to Southern Florida, Phoenix, Arizona and Wisconsin. (Representing hot humid, dry and industrial climates)

Accelerated Weathering Test:
ASTM G155-04a

Pass - film maintained integrity and also examined for adhesion, checking, cracking, peeling, separation, chalking, dirt retention, mildew and changes in color and gloss

Abrasion Resistance,
Falling Sand
ASTM D 968-93 (2001) Method A

20,000 - 24,000 liters sand/mil of coated film

1 System available to approved applicators only.

2 American Society for Testing & Materials

NOTE: K-Kron II color selectors are available through Kolbe dealers. For an accurate, computerized color match, please take a K-Kron II sample to a local paint supplier.


Warranties

Warranties

For information relating to warranties, please contact your local Kolbe dealer.

Fiberglass Doors (Effective July 1, 2014)
Twenty-five (25) Years, Fiberglass Door Panels | Ten (10) Years, Insulating Glass
Limitations Apply

Install/Maintain

Fiberglass Doors

Aug 01, 2005 - SKU# 5106600 - 374kb

Methods for installing Kolbe fiberglass doors with wood or aluminum clad frames. Preparing the rough opening & unit, sealant & flashing, insulation, finishing, maintenance & more.

Ultra, Heritage, Classic Series & Fiberglass Swinging Doors

Jul 08, 2013 - SKU# 5142290 - 775kb

Methods for installing Kolbe outswing and inswing entrance doors. Includes tools required, preparing the rough opening & unit, sealant & flashing, installing the hardware, insulation, finishing, maintenance & more.



Text Size: A A