Share/Bookmark Print

Fiberglass Doors

Fiberglass doors & sidelites are available either with a variety of wood grain textures or a smooth skin to complement any architectural style. Beyond glass with or without caming, PDL or GIA bars, they are also available with 9 decorative glass designs and with multiple finishes. They are available with operation that swings to the indoors or outdoors, and as single- or double-wide units.

Door Panels

  • High-Definition Detail & Embossing
  • Multiple Wood Grain Textures
  • Smooth Skin Doors
  • Five Stain Colors
  • Over 30 K-Kron Finish Colors

Glass

  • Decorative Caming, Bevels or PDL Bars
  • Nine Decorative Glass Patterns
  • LoE Coatings, Blinds in Glass

Door Frames

  • Extruded Aluminum Clad
  • Wood
  • 50+ Exterior Colors
  • Trim Options

 Sizes & Hinging

.

Fiberglass Doors

Rustic Mahogany

Deep wood grain that resembles distressed wood, with inswing or outswing operation and Ultra Series extruded aluminum clad frame or Heritage Series wood frame.

Craftsman Fir

Grain texture with the linear aesthetic of Fir and square profile design with a true Craftsman look and glass with caming or with a decorative design. Inswing or outswing operation and Ultra Series extruded aluminum clad frame or Heritage Series wood frame.

Deluxe

Available in four high-definition wood grain textures. Doors & sidelites with raised panels, glass, PDL, or decorative glass. Inswing or outswing operation and Ultra Series extruded aluminum clad frame or Heritage Series wood frame.

Standard Textured & Smooth

Oak wood grain texture or smooth skin doors with raised panels and/or glass, PDL, or nine decorative glass options. Inswing or outswing operation and Ultra Series extruded aluminum clad frame or Heritage Series wood frame.

Exterior

Unfinished

The exterior of door and sidelite panels are unfinished as standard. 

Factory-Finished Stain Colors

Five stain colors are available for the exterior of textured panels.

  • Cherry
  • Lt. Oak 998
  • Red Wheat
  • Spiced Walnut
  • Sunset Oak

Please select colors based on actual samples from your dealer.

Ultra Series Extruded Aluminum Clad Frames

  • Durable .050" thick cladding of 6063 extruded aluminum alloy, press-fit onto the exterior wood frame
  • Accessory grooves are integral to the frame for easy addition of a wide variety of extruded trims and sill nosings
  • Finish options that are available for Ultra Series products; over 50 colors are available
  • Trim options that are available for Ultra Series products

Heritage Series Wood Frames

  • Wood frame, exterior finished with latex primer as standard
  • Finish options that are available for Heritage Series products; over 30 colors are available
  •  Trim options that are available for Heritage Series products

Interior

Unfinished

The interior of door and sidelite panels are unfinished as standard. 

Factory-Finished Stain Colors

Five stain colors are available for the interior of textured panels.

  • Cherry
  • Lt. Oak 998
  • Red Wheat
  • Spiced Walnut
  • Sunset Oak

Please select colors based on actual samples from your dealer.

Factory-Applied Paint

Seven paint colors are available for the interior of Standard fiberglass door and sidelite panels. Custom colors may be requested.

  •  
    Bright White
  •  
    Ultra Pure White
  •  
    Abalone
  •  
    Silk
  •  
    Ivory Tusk
  •  
    Natural Cotton
  •  
    Beige

Please select colors based on actual samples from your dealer.

Glass

Decorative Glass Options

Nine decorative glass designs are available for most Standard and Deluxe fiberglass doors and sidelites: Capella, Catalina, Harrison, Heartland, Martiel, Oxford, Regency, and Solitude. Privacy ratings and detailed glass information is available for each decorative glass design by on the Deluxe and Standard pages.

Decorative glass varies widely in the amount of privacy it affords. Each is given a privacy rating from 1 to 10, so you can choose the right amount of opacity for you. 

NOTES:

The below glass options apply to most Deluxe and Standard door and sidelite panels. 

+
Glass Terminology        expand (+) or contract (-) details -->
Double Pane Insulating Glass with LoE²-270

  • Standard in most Kolbe windows and doors
  • Achieves energy efficiency across the various climate zones in the U.S.
  1. Double pane insulating glass
  2. LoE²-270 (other LoE coatings avaialble)
  3. Argon gas (for exceptions, see Glass Terminology)
  4. Thermo-Edge, stainless steel spacer bars

ThermaPlus

ThermaPlus is an optional, additional interior coating applied to help meet the strictest energy requirements and provide protection against heat loss and UV damage.

  1. Double pane insulating glass
  2. LoE²-270 (other LoE coatings available)
  3. Argon gas (for exceptions, see Glass Terminology)
  4. ThermaPlus coating on indoor surface of the glass
  1. Thermo-Edge, stainless steel spacer bars

Neat Glass

You may request Neat® glass, which harnesses the sun’s UV rays to loosen dirt so water can rinse it away, leaving windows virtually spotless. A special sputter-coating process makes the exterior glass surface ultra smooth, so the water "sheets off" more readily than it would on uncoated glass, allowing you to spend less time cleaning.

 Watch a video

*Except units with specialty glass on surface #1 or #2

Laminated Glass

The benefits of choosing laminated glass include safety, security, sound control and the ultimate in UV blockage.

  1. Double pane insulating glass
  2. LoE coating options
  3. Argon gas (for exceptions, see Glass Terminology)
  4. Thermo-Edge, stainless steel spacer bars
  5. Laminated glass - two pieces of glass fused together with a plastic interlayer

NOTE: Either one or both pane(s) may be laminated. If products must meet specific impact or design pressure ratings, they may or may not incorporate laminated glass, and may require construction and structural modifications as well.

Preserve Protective Film

Preserve is an optional, protective film that protects the glass from scratches during transit and construction, as well as reducing the time involved in job site clean-up.

Watch a video

NOTE: Not available on single-glazed units, units with true divided lites or other small insulating glass units, or some types of decorative glass. Contact your local Kolbe dealer for more information.

Divided Lites

The Performance Divided Lite (PDL) System

The performance divided lite (PDL) system uses double pane insulating glass units with bars adhered to the interior and exterior of the glass unit. Plus, spacer bars are held within the insulating glass unit. The visual continuity of the interior bars, spacer bars, and exterior bars creates the illusion of true divided lites.

The spacer bars allow air and/or argon gas to flow within the glass unit. Therefore, due to the large, unobstructed thermal break, the products are more energy efficient than products with true divided lites.

PDL for Deluxe Doors

Deluxe doors are available with 1" wide PDL bars with an ovolo-like profile. Spacer bars are a champagne color; bronze and mill finish spacer bars are optional. PDL is not available on Deluxe doors with decorative glass.

PDL for Standard Doors

Standard fiberglass doors are available with wood or aluminum PDL bars, depending on whether the panel is textured or smooth, whether the bars are on the interior or exterior surface, and whether they are finished, primed or unfinished. If the panel is factory-finished, the bars will be finished to complement the door panel.

PDL bars for Standard doors are available in widths of 5/8", 7/8", 1-1/8", 1-3/4", 2-1/4" and 4-1/2". The bars have a beveled profile; interior bars are available with an ovolo or square profile option. Spacer bars are a champagne color; bronze and mill finish spacer bars are optional. Custom PDL bar widths and profiles are available.

NOTE: Various circumstances – such as radius grille patterns – may require different PDL bar materials. PDL is not available on panels with blinds, venting panels, or panels with decorative glass.

Grilles-in-the-Airspace (GIA) for Standard Doors

Standard fiberglass doors are available with grilles-in-the-airspace (GIA). GIA offers the aesthetic of divided lites, without obstructing the interior or exterior glass surface, making the glass easy to clean. Aluminum bars are sealed within the insulating glass unit, allowing air and/or argon gas to flow within the glass unit. Bar types include:

  • 3/4" contoured bars
  • 5/8" flat bars
  • 5/16" pencil-shaped bars in brass or pewter

 

Finish Options:

  • White
     
  • Beige
     
  • Sand
     
  • Rustic
     
  • Hartford
    Green
  • Chutney
     
  • Light
    Wood
  • Dark
    Wood

Some may be available with:

  • Flat brass bars
  • Two-tones, i.e. one color or wood appearance option on the interior and a different one on the exterior
  • Custom patterns

NOTE: GIA options for panels with blinds and venting panels are slightly different than what is outlined here; please follow the links at left to Panels with Blinds and Venting Panels for more details. Decorative glass is not available with GIA.

Install, Maintain & Warranty

Warranties

For information relating to warranties, please contact your local Kolbe dealer.

Fiberglass Doors (Effective July 1, 2014)
Twenty-five (25) Years, Fiberglass Door Panels | Ten (10) Years, Insulating Glass
Limitations Apply


Text Size: A A