Share/Bookmark Print

Classic Series Garden-Aire Sliding Patio Doors

Classic Series Garden-Aire sliding patio door with stationary panel mulled to the left and direct set transom stacked above

Classic Series

  • Wood interior
  • Roll-formed aluminum clad exterior
  • Four classic exterior color options
  • 20-year ltd ext finish warranty

Classic Series Garden-Aire Sliding Patio Doors

  • Wood interior
  • Roll-formed aluminum clad exterior
  • Polyester exterior finish
  • Four classic exterior color options
  • 20-year limited ext finish warranty
  • Standard jamb is 4-9/16" wide
  • 1-3/4" thick sash panels
  • 3" wide LVL stiles and rails
  • Tandem rollers with adjustable, ball-bearing wheels
  • Various sizes for new construction or remodeling

Configurations

These are examples of common configurations; others are available.

NOTE: Cross section drawings & symbols are available by clicking the "Sizes, 2D..." tab above.

Glass

+
Glass Terminology (expand for details -->)
Tempered Glass

Tempered glass is standard in doors for safety and available in windows to meet specific building codes. If broken, tempered glass shatters into small fragments rather than large, sharp shards.

Double Pane Insulating Glass with LoE²-270

  • Standard in most Kolbe windows and doors
  • Achieves energy efficiency across the various climate zones in the U.S.
  1. Double pane insulating glass
  2. LoE²-270 (other LoE coatings avaialble)
  3. Argon gas (for exceptions, see Glass Terminology)
  4. Thermo-Edge, stainless steel spacer bars

ThermaPlus

ThermaPlus is an optional, additional interior coating applied to help meet the strictest energy requirements and provide protection against heat loss and UV damage.

  1. Double pane insulating glass
  2. LoE²-270 (other LoE coatings available)
  3. Argon gas (for exceptions, see Glass Terminology)
  4. ThermaPlus coating on indoor surface of the glass
  1. Thermo-Edge, stainless steel spacer bars

Laminated Glass

The benefits of choosing laminated glass include safety, security, sound control and the ultimate in UV blockage.

  1. Double pane insulating glass
  2. LoE coating options
  3. Argon gas (for exceptions, see Glass Terminology)
  4. Thermo-Edge, stainless steel spacer bars
  5. Laminated glass - two pieces of glass fused together with a plastic interlayer

NOTE: Either one or both pane(s) may be laminated. If products must meet specific impact or design pressure ratings, they may or may not incorporate laminated glass, and may require construction and structural modifications as well.

Patterned Glass

Pattern 62 obscure glass can provide shading, increase privacy, and add to the visual interest of a window or door. It is held within the insulating glass unit, which allows a smooth surface that is easily cleaned.

Neat Glass

You may request Neat® glass, which harnesses the sun’s UV rays to loosen dirt so water can rinse it away, leaving windows virtually spotless. A special sputter-coating process makes the exterior glass surface ultra smooth, so the water "sheets off" more readily than it would on uncoated glass, allowing you to spend less time cleaning.

 Watch a video

*Except units with specialty glass on surface #1 or #2

Preserve Protective Film

Preserve is an optional, protective film that protects the glass from scratches during transit and construction, as well as reducing the time involved in job site clean-up.

Watch a video

NOTE: Not available on single-glazed units, units with true divided lites or other small insulating glass units, or some types of decorative glass. Contact your local Kolbe dealer for more information.

Divided Lites

The PDL System for Ultra, Heritage & Classic Series Products

The Performance Divided Lite (PDL) system uses a single insulating glass unit, which offers much better U-factors than true divided lite units. This is due to the large, unobstructed thermal break created by airflow within the insulating glass unit.

  1. Wood bars are adhered to the interior of the insulating glass unit*
  2. Aluminum, beveled-profile bars are adhered to the exterior*
  3. Champagne-colored bars are held within the insulating glass unit

*Some intricate designs and coastal applications may require a composite material for the exterior PDL bars and are not coated with fluoropolymer finish.

PDL bars

  • Exterior & interior bars are finished to match the exterior or interior of the window or door unit
  • Optional bar widths: 5/8", 7/8", 1-1/8", 1-3/4", 2-1/4", 4-1/2" and custom
  • Interior bar profiles: beveled (standard), ovolo, and square

NOTE: Double pane insulating glass have one bar within the insulating glass unit, as shown above. Triple pane insulating glass have two bars, one in each airspace. Limitations may apply, especially to curved bars.

Interior Removable Grilles for Garden-Aire Sliding Patio Doors

Interior removable wood grilles offer aesthetic flexibility, as well as easy cleaning. They are available only on wood products.

Construction & Benefits

  • Built with full surround frame and bars that interlock at the joints for stability
  • Applied to interior of door
  • Offer the ability to change styles by removing the grilles
  • Can easily be removed to clean the glass
  • Species: pine (standard), other wood species (option)

Bar Profiles & Widths

  • Interior bar profiles: beveled (standard), and ovolo (option)
  • Optional bar widths: 7/8", 1-1/8", and custom

Factory Finishes

Prefinishing available to match interior finish of entire unit (option)

NOTE: If ovolo bar profile is chosen, glazing beads will be ovolo to match. If a finish is requested, it will be applied to both sides of the grille; i.e., the sides seen from the interior and exterior will be finished the same. Primer is not available on grilles.

Grilles-in-the-Airspace (GIA) for Ultra, Heritage & Classic Series Products

  • Achieves a style similar to true divided lites
  • Easy to clean, with no obstruction on the interior or exterior of the glass unit
  • Aluminum bars are sealed within the "airspace" of insulating glass units*
  • The bars allow air-flow throughout the insulating glass unit, creating an unobstructed thermal break, maintaining an energy efficiency not possible with true divided lites
  1. Contoured, aluminum bars (finishes below)
  2. Flat, aluminum bars (finishes below)
  3. "Pencil-shaped" brass bars
  4. "Pencil-shaped" pewter bars

 

Finish Options on Contoured & Flat Bars (contoured bars shown)

  • White
  • Beige
  • Sand
  • Rustic
  • Hartford Green
  • Chutney
  • Lt Wood
  • Dk Wood

GIA for Wood

NOTES: Ask your dealer about other options. Some units are available with:

  • Flat brass bars
  • Two-tones, i.e. one color or wood appearance option on the interior and a different one on the exterior
  • Custom patterns & bar "shapes" (limitations apply due to bending capabilities)
  • Diamond patterns are not available

*For triple pane units, the bars are held within the exterior airspace. GIA are not available on Ultra or Heritage Series Sterling Double Hungs, Studio Units, or Sliding Patio Doors with triple pane glass.

**The wood "finishes" are wood appearance options and not real wood.

Glazing Bead

Beveled Glazing Beads

Beveled glazing beads help create the traditional look of wood windows

Ovolo Glazing Beads

Ovolo glazing beads create a more unique profile.

Square Glazing Beads

Square glazing beads provide a crisp, clean appearance often seen in Craftsman or contemporary design.

Hardware

NOTE:

On-screen images of finishes and colors may vary slightly from actual colors. Selections should be made based on actual color samples from your local dealer. Prices may vary depending on the color or finish chosen.

Operating Hardware

  • Tandem rollers with adjustable, ball-bearing wheels carry the sliding panel smoothly
  • Operation is not reversible in the field

Locks & Handle Sets for Classic Sliding Patio Doors

  • Single-point mortise latch with handle set in Rustic Umber (shown) or White (standard)
  • Secondary security lock (option)

Sills

Standard Sill - Fiberglass

  • One-piece, pultruded fiberglass sill
  • Continuous aluminum sill nosing and fiberglass sill filler
  • Thick oak interior threshold

Screens

Aluminum-Framed Sliding Insect Screens (Standard)

  • Adjustable steel rollers at top & bottom
  • Smooth sliding operation
  • Frame colors complement door unit exterior finish colors*
  • BetterVue screen mesh (see details & screen mesh options below)

*Limitations may apply, cost may vary depending on color selected

BetterVue® Screen Mesh (standard for most products)

  • Fine fiberglass mesh provides improved visibility
  • Tighter weave keeps smaller bugs out
  • Flame retardant
  • Light-weight & flexible
  • Doesn't corrode, stain, rust, crease or dent
  • GreenGuard® Certified

UltraVue® Screen Mesh (Option)

Fiberglass mesh with qualities similar to BetterVue®, plus:

  • Enhanced visibility offers the ultimate in visibility
  • Exceeds other fiberglass insect screen mesh on the market

Aluminum Screen Mesh (Option)

  • Strong and durable
  • Prevents damage from fiberglass screen-eating insects
  • Available in aluminum or charcoal-colored aluminum mesh


Exterior Finish/Colors

Polyester Finish

  • Aluminum cladding coated with a polyester finish, then baked continuously to cure and harden
  • Resists marring and fading, while increasing weatherability
  • Low maintenance, durable finish
  • 20-year warranty extended directly to the homeowner (view Warranties)
  • Warranty is transferable to subsequent homeowners
  • Available in 4 standard colors

  •  
    White
  •  
    Beige
  •  
    Sand
  •  
    Rustic

NOTE:  On-screen images of exterior finishes may vary slightly from actual colors.  Selections should be made based on actual color samples.

Finish Option - Copper Cladding

  • Enhance the aesthetic appeal with copper cladding
  • Develops a natural and unique patina over time
  • Available on most Classic Series units

NOTE:  On-screen images of exterior finishes may vary slightly from actual colors.  Selections should be made based on actual color samples.


Interior Species

Wood Species

  • Pine (standard)
  • Alder
  • Fir
  • Maple
  • Cherry
  • Oak
  • Walnut
  • Mahogany
  • Bamboo*

NOTE: Because wood varies by nature, the actual wood used in our products may vary in grain and color from that shown here.

Other wood species may be available upon request.

NOTE: Because wood varies by nature, the actual wood used in our products may vary in grain and color from that shown here. Selections should be made based on actual samples.

*Bamboo is sourced from companies such as Lamboo, Inc.

Interior Finish/Colors

Unfinished

Unfinished on the interior unless requested otherwise.

Factory-Applied Primer

  • The interior of wood windows & doors may be ordered factory-primed
  • Primer prepares your windows and doors for a beautiful, painted finish to be completed on the job site

NOTE: Limitations may apply; contact your local Kolbe dealer for more information.

Factory-Applied Clear Coat or Stain

Double Clear Coat

Let the natural beauty of the wood show with a durable clear finish. Note that when a double clear coat is requested without stain, a durable, solvent-based finish will be used.

Stain

Water-based stain is applied, then two coats of clear, water-based satin finish are applied to help protect the stain. The wood is lightly sanded between the coats. Custom stain colors may be requested.

  • Double Coat Clear
  • Wheat
  • Red Wheat
  • Light Oak 998
  • Spiced Walnut
  • Sunset Oak
  • Chestnut
  • Cherry
  • Library Red
  • Coffee Bean
  • Ebony

NOTE: On-screen images of interior finishes may vary from actual colors. Stain colors shown on pine. Selections should be made based on actual color samples. Limitations may apply; contact your local Kolbe dealer for more information.

Factory-Applied Paint

After being factory-primed, a topcoat of water-based, acrylic type latex paint is applied. Custom colors may be requested.

  •  
    Bright White
  •  
    Ultra Pure White
  •  
    Abalone
  •  
    Silk
  •  
    Ivory Tusk
  •  
    Natural Cotton
  •  
    Beige

NOTE:  On-screen images of interior finishes may vary from actual colors.  Selections should be made based on actual color samples.  Limitations may apply; contact your local Kolbe dealer for more information.

Interior Trim

Interior Trim Options

Accent the interior of windows and doors with interior casing.

  • 2-1/8" wide ranch casing (1) or 2-1/4" wide colonial casing (2) in pine or oak
  • Radius casing
  • Specialty mouldings are available in pine, oak and other wood species
  • Shipped loose for field application

 

Corner Block Options

Giving windows and doors a signature look has never been easier. Complement the interior with:

  • Corner blocks
  • Rosettes
  • Available in pine or oak


Drawing Files - Misc for Classic Series Garden-Aire Sliding Patio Doors

Download: All files below

  Word PDF
CSI Specifications
   Sliding Patio Doors - Sidelites & Transoms (includes clad profile)
Formulas & Charts
   Dimensions - Limits - Clr Opgs - Multiple Assembly  

Drawing Files - Sizes / Elevations for Classic Series Garden-Aire Sliding Patio Doors

Download: All files below

  DWG DXF PDF
Transoms for Garden-Aire Sliding Patio Doors
   Rough Opg W 2' 9'' to 8' 0-1/2'' x H 1' 0'' to 2' 6''
1-, 2- & 3-Wide Garden-Aires
   New Construction & Remodeling Sizes
Rough Opening Statement
   This information is essential for accurate planning.    

Drawing Files - Section Details for Classic Series Garden-Aire Sliding Patio Doors

Download: All files below

  DWG DXF PDF
Transom over Garden-Aire
   Sash Set Stack Detail
   Direct Set Stack Detail
Sidelites with 4-9/16" Jambs
   Head
   Sill
   Left Jamb
   Right Jamb
2-Wide Units with 4-9/16" Jambs
   Active Panel - Head
   Active Panel - Sill
   Stationary Panel - Head
   Stationary Panel - Sill
   Active Panel - Left Jamb
   Stationary Panel - Right Jamb
   Meeting Stiles
3-Wide Units with 4-9/16" Jambs
   Active Unit to Sidelite - Horizontal
   Active Panel - Left Jamb
   Active Panel - Right Jamb
   Stationary Panel - Left Jamb
   Stationary Panel - Right Jamb
   Sidelite - Left Jamb
   Sidelite - Right Jamb
   Mull Detail
Sidelites with 6-9/16" Jambs
   Head
   Sill
   Left Jamb
   Right Jamb
2-Wide Units with 6-9/16" Jambs
   Active Panel - Head
   Active Panel - Sill
   Stationary Panel - Head
   Stationary Panel - Sill
   Active Panel - Left Jamb
   Stationary Panel - Right Jamb
   Meeting Stiles
3-Wide Units with 6-9/16" Jambs
   Active Panel - Left Jamb
   Active Panel - Right Jamb
   Stationary Panel - Left Jamb
   Stationary Panel - Right Jamb
   Sidelite - Left Jamb
   Sidelite - Right Jamb
   Mull Detail

Drawing Files - Divided Lites for Classic Series Garden-Aire Sliding Patio Doors

Download: All files below

  DWG DXF PDF
Performance Divided Lites with Square Bars
   5/8'' Wide Bars
   7/8'' Wide Bars
   1-1/8'' Wide Bars
   1-3/4'' Wide Bars
   2-1/4'' Wide Bars
Removable Grilles with Beveled & Ovolo Bars
   7/8'' & 1-1/8'' Wide Bars
Performance Divided Lites with Beveled & Ovolo Bars
   All Bar Widths - Sash Detail

Drawing Files - Installation Details for Classic Series Garden-Aire Sliding Patio Doors

Download: All files below

  DWG DXF PDF
Wood Lap Siding
   2x4 Wood Frame
   2x6 Wood Frame - Wide Ext Jambs
Installation & Maintenance Information
   Classic Series    
Brick Veneer over 1/2" Sheathing
   2x4 Wood Frame
Brick Veneer over 6" Masonry Wall
   Wide Ext Jambs
Stucco over 1/2" Sheathing
   2x6 Wood Frame
Stucco over 8" Masonry Block
   No Brickmould

Drawing Files - All Files for Classic Series Garden-Aire Sliding Patio Doors

Download files for this product: (does not include related product models)

DWG files

DXF files

Word files

PDF files

All of the above


Use links at left to view detailed descriptions of individual files. Each page
includes a downloadable zip file of drawings in that category.


Performance Data

Product Performance Data

  • Air, Water & Structural Test Reports Manual -  Includes test data for both wood & vinyl windows and doors. Includes DP ratings; air and water infiltration test results (psf), and structural test results (psf), Hallmark certification numbers, TDI approval information, FL approval information, HVHZ approval information, and Dade County Notice of Acceptance. Products approved for impact performance are noted with the zone of approval.
  • Classic Series Sliding Patio Door Acoustic Performance Data - Test data for sound transmission

Finish Performance

Polyester Finish Performance

  • Aluminum cladding coated with a polyester finish, then baked continuously to cure and harden
  • Resists marring and fading, while increasing weatherability
  • Low maintenance, durable finish
  • 20-year warranty extended directly to the homeowner (view Warranties)
  • Warranty is transferable to subsequent homeowners
  • Available in 4 standard colors
Polyester Coating Details
 

White
02-159-6

Rustic
02-409-6

Beige
02-3BT-3

Sand
02-268-5

Salt Spray

2000 hours pass

2000 hours pass

2000 hours pass

2000 hours pass

Acid Resistance

No effect

No effect

No effect

No effect

Alkali Resistance

No effect

No effect

No effect

No effect

Resistance to Acid Pollutant

Less than 3 Delta E units color change

Less than 3 Delta E units color change

Less than 3 Delta E units color change

Less than 3 Delta E units color change

Weathering Color Retention

Max 5 Delta E units 5 yrs

Max 5 Delta E units 5 yrs

Max 5 Delta E units 5 yrs

Max 5 Delta E units 5 yrs


 


Warranties

Warranties

Wood and Vinyl Window & Door Products (Effective Jan. 1, 2012)
Wood, Ten (10) Years, Limitations Apply | Vinyl, Limited Lifetime

Insulating Glass (Effective Jan. 1, 2012)
Products with Stainless Steel Spacers: Twenty (20) Years
Products with Aluminum Spacers: Ten (10) Years
Limitations Apply

Factory Finishes (Effective Sept. 1, 2014)
Latex Primer, Five (5) Years | K-Kron, Ten (10) Years
Vinyl Finishes & Interior Wood-Appearance Lamination, Ten (10) Years
Polyester/Alum. Clad, Twenty (20) Years | Fluoropolymer/Clad, Thirty (30) Years
Limitations Apply

International - Wood & Vinyl Window & Door Products (Effective Jan. 1, 2012)
Five (5) Years, Limitations Apply

For other information relating to warranties, please contact your local Kolbe dealer.

Install/Maintain

Kolbe Flashing Information

Apr 10, 2012 - SKU# 5085340 - 3163kb

Guidelines for sealing Kolbe windows and doors during installation. Discusses the primary surface for shedding water. Includes various methods for appying flashing before and after unit installation.

Kolbe Sealant Information

May 31, 2008 - SKU# 5141500 - 192kb

General information about sealant types and sealant joint designs, such as lap joints, fillet joints and wide-butt joints. Includes comments regarding sealant performance on various building surfaces.

Maintenance Guide

Apr 02, 2008 - SKU# 5062530 - 604kb

Includes definitions and illustrations of various window and/or door components, operating & maintenance procedures for Kolbe products, cleaning products, reinstallation of removable sash, and care of hardware. Also includes frequently-asked questions about windows and/or doors, as well as information about condensation in relation to windows and doors.

Ultra, Heritage & Classic Series Garden-Aire Sliding Patio Doors - Locks

Apr 01, 2003 - 193kb

Includes instructions & a template provided by the vendor.

Ultra, Heritage & Classic Series Garden-Aire Sliding Patio Doors - Handle Operation Instructions

Aug 01, 2003 - 71kb

Garden-Aire Handle Operation Instructions as provided by Hoppe.

Ultra, Heritage & Classic Series Garden-Aire Sliding Patio Doors - Locking Handle Set with Keyed Cylinder

Jun 01, 2004 - SKU# 2082767 - 94kb

Instructions as provided by Hoppe. Date unknown.

Ultra, Heritage & Classic Series Garden-Aires - Retrofitting

Nov 29, 2007 - SKU# 5135630 - 131kb

These instructions are for retrofitting the Extruded Stationary Meeting Stile Cover onto existing Garden-Aire sliding patio doors.

Canada ENERGY STAR® Website Reference Document

Jan 29, 2008 - 883kb

This document explains how the search for Kolbe window & door product ratings on the Canadian ENERGY STAR® website.

Finishing Your Kolbe Windows & Doors

Apr 02, 2008 - SKU# 5139130 - 62kb

Includes finishing recommendations for your Kolbe windows & doors, exterior finishing of products, and interior finishing of products.

Ultra, Heritage & Classic Series Garden-Aire Sliding Patio Doors - Handicap Sill Ramps

Mar 01, 2008 - SKU# 5135920 - 240kb

These instructions are for installing a Handicap ramp on a 407 Garden-Aire Sliding Patio Door. Contents: Parts Included, Items Needed by Installer, Preparation and Application of Ramps.

Ultra, Heritage & Classic Series Garden-Aire Sliding Patio Doors - 4-Wide

Jan 31, 2009 - SKU# 5143410 - 919kb

(407) Methods for installing 4 Wide Ultra, Heritage & Classic Series Garden-Aire sliding patio doors. Preparing the rough opening & unit, sealant, securing the sill stop, insulation, finishing, maintenance, cleaning & more.

Ultra, Heritage & Classic Series Garden-Aire Sliding Patio Doors - Frame Assembly

Jan 31, 2009 - SKU# 5143480 - 258kb

(407) Methods for frame assembly of Garden-Aire Sliding Patio Doors shipped with the frame knocked down.(Note: the use of either the 2&3 Wide Gardenaire installation instructions or 4 wide Garden-Aire Installation Instructions is required along with these instructions to install the door into the opeining.)

Ultra, Heritage & Classic Series Garden-Aire Sliding Patio Doors - 2- & 3-Wide

Jan 31, 2009 - SKU# 5142660 - 597kb

(407) Methods for installing 2 & 3 Wide Ultra, Heritage & Classic Series Garden-Aire sliding patio doors. Preparing the rough opening & unit, sealant, securing the sill stop, insulation, finishing, maintenance, cleaning & more.

Ultra, Heritage & Classic Series Garden-Aire Sliding Patio Doors - AFA (3-wide with center fixed panel)

Jan 11, 2013 - SKU# 5153080 - 960KB

(407) Methods for installing 3 Wide Ultra, Heritage & Classic Series Garden-Aire sliding patio doors with a fixed center panel. Preparing the rough opening & unit, sealant, securing the sill stop, insulation, finishing, maintenance, cleaning & more.



Text Size: A A