1-3/4" thick sash panel prehung in a 1-1/16" frame with
a 1/2" rabbeted-in stop
Standard jamb width is 4-9/16"
LVL locking stiles; stiles and top rails are a nominal
4-5/8" wide; bottom rail is a nominal 7-9/16" high
Constructed of pine, with pine interior stops and wood
mull casings on mulled units
Energy efficient, insulating LoE
(tempered glass is
standard on outswing doors)
Glazed to the interior with beveled wood glazing beads
All exterior wood parts are treated
.050" thick, 6063 extruded aluminum alloy frames are
press fit on to the wood frame exterior of all units
Accessory grooves are integral to the extruded frames
for the easy addition of accessories
Frame corners are mitered or profile cut, with internal
corner and end keys screwed into the joints and
injected with sealant
Sash exterior is covered with .062" thick, 6063
extruded aluminum alloy
(when design contains raised panel, the
raised panel is covered with .040" thick, 1100 extruded aluminum alloy)
70% PVDF fluoropolymer finish on frame and sash
(meets performance requirements of AAMA 2605)
Fully weatherstripped for a tight seal
Non-adjustable, residential, 4" x 4" ball-bearing hinges
with 1/4" radius corners in a Bright Brass finish
Bronze-anodized aluminum bumper sill with oak interior
Heavy vinyl nailing fins with head drip caps*
Raised panels and/or glass lites
Outswing Door Standard Features
NOTE: All measurements are nominal.
* Standard only on units without brickmould.
Vinyl nailing fin applied as
standard to units without
138 Kolbe Ultra Series
Outswing doors are available with the same multitude of options as inswing doors, but swing outward for areas that
have space constraints. Outswing entrance and patio doors are available in single, double and French units, and can be
customized with sidelites or transoms to create a distinctive opening.
Photo courtesy of Kenneth M Wyner Photography, Inc.