Table of Contents Table of Contents
Previous Page  3 / 12 Next Page
Information
Show Menu
Previous Page 3 / 12 Next Page
Page Background

Panels in pocketing

configurations recess

flush to the wall

Recessed

Recessed sills have a black anodized finish

and feature a stainless steel roller cap that

is 1/2" tall. The sill can either be a weep

or non-weep design. An optional 3/16" tall

roller cap sill that is non-weeping is also

available. These sill designs are intended

for use in applications where a minimal

threshhold height is desired. Units with a

recessed sill are limited to 60' in width.

NOTE: The recessed sill shown above has been field-finished with wood.

Recessed sills may be finished during installation in a variety of materials.

Sill Options

Flush

The thermally broken flush sills have a black

anodized finish and feature a stainless

steel roller cap that is 1/2" tall. The sills

can either be a weep or non-weep design.

Optional interior flush sill nosing extensions

are available to meet various performance

requirements or special floor conditions.

Units with a flush sill are limited to 28' in

width.

Weep

Non-weep

Construction Details & Sill Options

Interior panel head end

cover will blend with color

or wood species

Expandable, thermally

broken head and side

jambs

Thermally broken panels with

architecturally-correct coped

corners where stile meets rail

NOTES: All measurements are nominal. Numerous cross section details are shown on pages 9-10.

Additional drawings are available on our website at

www.kolbe-kolbe.com

.

* Curved units are also available; contact your Kolbe dealer for further information and to ask about the

availability of other options not shown in this brochure.

** Argon gas may not be included with units to be installed in or shipped through high altitude areas.

***The Oil-Rubbed finish is a living finish, which means that it will change appearance over time with

use.

TerraSpan Lift & Slide Standard Features

}

2-1/4" thick panels with end caps to match color or wood

species

}

Panels can pocket into a wall or stack together

}

90° corner units are also available*

}

4-5/8" wide stiles and rails provide a large glass area

}

70% PVDF fluoropolymer finish on frame and sash

exteriors (meets performance requirements of AAMA

2605-05)

}

Tempered, 1" LoE

2

-270 insulating glass with argon gas**

}

Glazed to the interior

}

All interior wood panel parts are preservative-treated

}

Stainless steel multi-point locking hardware channels

provide corrosion resistance and increased security

}

Wheel sets are constructed of 300 series stainless steel

(drive bars, wheels, hubs and shafts, rivets, drive pins and

link rods) to provide superior corrosion resistance

}

Panels are available 30"-72" in width and 36"-144" in

height

}

LS100 removable handle set in Rustic Umber, Bright

Brass, Satin Nickel or Oil-rubbed***

}

Black anodized flush mount weep sill is thermally broken

with 1/2" roller cap height

}

Black anodized recessed weep sill option with 1/2" roller

cap height

}

Panels are thermally broken using a .090" thick extruded

double-wall aluminum alloy frame press fit to a non-

conductive fiberglass core finished on the interior with a

solid wood cover

}

Fully weatherstripped for a tight seal

}

Interior pocket cover for all pocket doors

}

No visible fasteners

}

Traditional coped stile and rail joints on both interior and

exterior

}

Glazing bracket is inter-locked and screwed from the

interior side of the core and hidden by the interior wood

panel cover

}

Removable handle

}

Up to ten panels in a system

3