Previous Page  2 / 2
Information
Show Menu
Previous Page 2 / 2
Page Background

Multi-Slide Doors

}}

1-3/4" thick sash

}}

Jamb depth is dependent on the number of panels

used. Wood interior jamb extension species to match

interior of panels

}}

LVL locking stiles; stiles and top rails are a nominal

4-5/8" wide; bottom rail is a nominal 7-9/16" high

}}

Frame shipped knocked down, prepped for assembly

}}

Frame is constructed of Dark Bronze anodized

aluminum with pine interior stops

}}

All exterior wood parts are preservative-treated

}}

7/8" LoE

2

-270 insulating glass*

(tempered glass is standard

on multi-slide doors)

}}

Glazed to the interior with wood glazing beads

}}

.090" thick, 6063 extruded aluminum alloy exterior

frame nosings are attached to the aluminum base frame,

while the sash exterior is covered with .062" thick, 6063

extruded aluminum alloy

}}

70% PVDF fluoropolymer finish on frame and sash

exteriors

(meets performance requirements of AAMA 2605-05)

}}

Frame corners are mitered or profile cut

}}

Fully weatherstripped for a tight seal at sill, head, jambs,

panel interlocks, and pocket interlocks

}}

Panel interlock is attached to and is a part of the frame

for pocketing systems

}}

Continuous full-width sill

(sill can be set into the floor system

for low profile use)

}}

Bottom rolling system with polypropylene-sealed

precision bearing wheels

}}

Dark Bronze anodized weep sill with stainless steel roller

caps

(sill is prepped for water drainage and requires the use of

a sill pan as standard)

}}

Multi-point lock

}}

For stacking systems, lever handle set is standard on

lead panel

}}

For pocketing systems, flush pull handle is standard on

lead panel, with thumb turn on the interior

(not available on

units with 3" stiles)

}}

Folding aluminum nailing fin applied

Standard Features

NOTES:

LoE

2

-240, LoE

2

-270, LoE

3

-366, Neat and Preserve are trademarks

of Cardinal IG.

All measurements are nominal.

Both stacking and pocketing frames are available up to a maximum

of 24 feet in length.

Maximum panel width is 48", maximum panel height is 120",

maximum number of panels is 10.

Panels over 96" in height are required to be 2-1/4" thick.

4-5/8" minimum bottom rail is required with 3" stiles.

Radius systems are not available.

* Argon gas may not be included with units to be installed in or

shipped through high altitude areas.

** 2-1/4" panels only; size limitations apply. Contact your Kolbe

dealer for more information.

Optional Features:

Glass:

}}

LoE

2

-240*

}}

LoE

3

-366*

}}

ThermaPlus LoE

}}

Neat

®

}}

1-3/8" triple pane glass**

}}

Patterned, bronze- or gray-lite

}}

Laminated

}}

Preserve™

}}

Other options standard to the industry

Divided Lites:

}}

Grilles-in-the-airspace

}}

Interior removable wood grilles with

7/8" or 1-1/8" bars and full surrounds

}}

Performance divided lites with 5/8",

7/8", 1-1/8", 1-3/4", 2-1/4" or 4-1/2"

bars

}}

Beveled, ovolo, or square profile

interior PDL bars

Other Options:

(custom options are

also available)

}}

Stile and top rail options: 3", 4-5/8"

or 6"

}}

Bottom rail options: 4-5/8", 6", 7-9/16"

or 12-5/8"

}}

Thermally broken sill and frame

}}

Other wood species and FSC-certified

wood

}}

2-1/4" thick panel

}}

Ovolo or square profile glazing beads

}}

Interior prefinishing

}}

Interior casing

}}

Black pleated sliding screen

}}

Flush pull handle option available on

stacking systems

}}

Edge pull available on innermost panel

of pocketing systems for ease of

operation

}}

Keyed lock option available for units

with lever handle sets

(not available on

units with flush pull handles)

}}

Extension jambs in a wide variety of

sizes

(shipped loose for field application)

© 2013 Kolbe & Kolbe Millwork Co., Inc.

Kolbe & Kolbe Millwork Co., Inc. reserves the right to change specifications without notice.

5153110-5M-0513-SPP

Printed on recycled paper

For professionals:

www.kolbe-kolbe.com

For homeowners:

www.kolbewindows.com